Nevermind, a friend just sent me a command to fix it. :B
Why don't you write what the command is so people who might have the same problem later on can find this thread and rectify it
Comangliacoms is updated - Download - Changelog
TLDR: comanglia's config with a few changes and fixed suggested by mastercoms to improve fps - for example disabling low violence mode since actually lowers the FPS
30/11/2017: Updated
09/12/2017: Updated
[i]TLDR: comanglia's config with a few changes and fixed suggested by mastercoms to improve fps - for example disabling low violence mode since actually lowers the FPS[/i]
[b]30/11/2017: Updated[/b]
[b]09/12/2017: Updated[/b]
sageComangliacoms is updated - Download - Changelog
TLDR: comanglia's config with a few changes and fixed suggested by mastercoms to improve fps - for example disabling low violence mode since actually lowers the FPS
i love you ty
[i]TLDR: comanglia's config with a few changes and fixed suggested by mastercoms to improve fps - for example disabling low violence mode since actually lowers the FPS[/i][/quote]
i love you ty
sageComangliacoms is updated - Download - Changelog
TLDR: comanglia's config with a few changes and fixed suggested by mastercoms to improve fps - for example disabling low violence mode since actually lowers the FPS
How would I turn off blood?
[i]TLDR: comanglia's config with a few changes and fixed suggested by mastercoms to improve fps - for example disabling low violence mode since actually lowers the FPS[/i][/quote]
How would I turn off blood?
sageComangliacoms is updated - Download - Changelog
TLDR: comanglia's config with a few changes and fixed suggested by mastercoms to improve fps - for example disabling low violence mode since actually lowers the FPS
I love you sage.
[i]TLDR: comanglia's config with a few changes and fixed suggested by mastercoms to improve fps - for example disabling low violence mode since actually lowers the FPS[/i][/quote]
I love you sage.
VulcanHow would I turn off blood?
violence_hblood 0
violence_hblood 0
ComangliasageComangliacoms is updated - Download - Changelog
TLDR: comanglia's config with a few changes and fixed suggested by mastercoms to improve fps - for example disabling low violence mode since actually lowers the FPS
I love you sage.
you should edit the main op with the updated one
mastercomsVulcanHow would I turn off blood?violence_hblood 0
thank you
[i]TLDR: comanglia's config with a few changes and fixed suggested by mastercoms to improve fps - for example disabling low violence mode since actually lowers the FPS[/i][/quote]
I love you sage.[/quote]
you should edit the main op with the updated one
[quote=mastercoms][quote=Vulcan]How would I turn off blood?[/quote]
violence_hblood 0[/quote]
thank you
hey mastercoms, with your updated config almost all weapons start out black and then the black "bleeds" out. Also all stickies are black, what command would turn this off?
mat_mipmaptextures 0
mat_mipmaptextures 0
Vulcanhey mastercoms, with your updated config almost all weapons start out black and then the black "bleeds" out. Also all stickies are black, what command would turn this off?
Try this thread. http://www.teamfortress.tv/42867/mastercomfig-fps-customization-config
Try this thread. http://www.teamfortress.tv/42867/mastercomfig-fps-customization-config
ComangliaVulcanhey mastercoms, with your updated config almost all weapons start out black and then the black "bleeds" out. Also all stickies are black, what command would turn this off?
Try this thread. http://www.teamfortress.tv/42867/mastercomfig-fps-customization-config
oh i meant with the comangliacoms config nvm figured out how to fix it
Try this thread. http://www.teamfortress.tv/42867/mastercomfig-fps-customization-config[/quote]
[s]oh i meant with the comangliacoms config[/s] nvm figured out how to fix it
Can somone please help me to find the command that remove unusual effect. I would love to be able to use this fps config but still see all the unusual effects. Thanks :)
Comangliacoms v1.30 is out !
-Removed many "dead" commands
-Added documentation from mastercoms for many non-explained commands.
-Extended and updated launch options documentation.
-Added "r_entityclips 0 // Skip clipping entities, saves CPU time" from mastercoms-
-Reduced smoothtime from 0.1 to 0.07
-Changed cl_pred_optimize from mode 2 to 1 while its bugged
-Commented out personal preferences such as voice chat or chat time.
[code]-Removed many "dead" commands
-Added documentation from mastercoms for many non-explained commands.
-Extended and updated launch options documentation.
-Added "r_entityclips 0 // Skip clipping entities, saves CPU time" from mastercoms-
-Reduced smoothtime from 0.1 to 0.07
-Changed cl_pred_optimize from mode 2 to 1 while its bugged
-Commented out personal preferences such as voice chat or chat time.[/code]
[url=http://timfortress.today/pages/fps.html]Check it out ![/url]
I have a question, what config would you suggest to get a minimum of 45 fps with these specs?
-AMD A6-7310 APU with AMD Radeon R4 graphics 2.00 GHz
-4.00 GB of Ram
This is a laptop mind you, but I'd appreciate an answer none the less.
Please and Thank you
-AMD A6-7310 APU with AMD Radeon R4 graphics 2.00 GHz
-4.00 GB of Ram
This is a laptop mind you, but I'd appreciate an answer none the less.
Please and Thank you
sageComangliacoms v1.30 is out !Check it out !-Removed many "dead" commands -Added documentation from mastercoms for many non-explained commands. -Extended and updated launch options documentation. -Added "r_entityclips 0 // Skip clipping entities, saves CPU time" from mastercoms- -Reduced smoothtime from 0.1 to 0.07 -Changed cl_pred_optimize from mode 2 to 1 while its bugged -Commented out personal preferences such as voice chat or chat time.
Hey, i just installed this version of config, before it i had last original version of comanglia's cfg, and i now got huge chokes.
Any help?
here is my net settings:
// Good connection
cl_cmdrate 66 // Your framerate should always be higher than your cmdrate.
cl_updaterate 66 // Rate at wich you receive updates from the server.
cl_interp 0 // By setting this higher than cl_interp_ratio / cl_updaterate,
// you are slightly increasing your interp for no reason.
// Also, interp is mostly preference at lower values
// and depends on how stable your connection is.
cl_interp_ratio 1
cl_lagcompensation 1 // Ensure lag compensation is turned on
cl_pred_optimize 1 // Mode 1 because 2 has a bug currently.
cl_smooth 1 // Smooths your view to prevent it jumping around.
cl_smoothtime 0.07 // Smooth out view for 0.07 seconds
rate 80000 // Affects how many packets you can send out
net_compresspackets 1 // Compress packets to prevent split packets
net_splitrate 2 // Split 2 packets per frame, reduces choke
[code]-Removed many "dead" commands
-Added documentation from mastercoms for many non-explained commands.
-Extended and updated launch options documentation.
-Added "r_entityclips 0 // Skip clipping entities, saves CPU time" from mastercoms-
-Reduced smoothtime from 0.1 to 0.07
-Changed cl_pred_optimize from mode 2 to 1 while its bugged
-Commented out personal preferences such as voice chat or chat time.[/code]
[url=http://timfortress.today/pages/fps.html]Check it out ![/url][/quote]
Hey, i just installed this version of config, before it i had last original version of comanglia's cfg, and i now got huge chokes.
Any help?
here is my net settings:
// Good connection
cl_cmdrate 66 // Your framerate should always be higher than your cmdrate.
cl_updaterate 66 // Rate at wich you receive updates from the server.
cl_interp 0 // By setting this higher than cl_interp_ratio / cl_updaterate,
// you are slightly increasing your interp for no reason.
// Also, interp is mostly preference at lower values
// and depends on how stable your connection is.
cl_interp_ratio 1
cl_lagcompensation 1 // Ensure lag compensation is turned on
cl_pred_optimize 1 // Mode 1 because 2 has a bug currently.
cl_smooth 1 // Smooths your view to prevent it jumping around.
cl_smoothtime 0.07 // Smooth out view for 0.07 seconds
rate 80000 // Affects how many packets you can send out
net_compresspackets 1 // Compress packets to prevent split packets
net_splitrate 2 // Split 2 packets per frame, reduces choke
Thank you so much! Before i use this cfg it has less than 60 fps but after i use this it has average fps at 60-90 fps and max is more than 100 fps! My PC is not a toaster now :D
I can see warpaints, but the texture quality is so bad they just look like a colored mess, where the command to make them more quality in the config? Or is this a DX issue? (Im on 91.)
AquilaI can see warpaints, but the texture quality is so bad they just look like a colored mess, where the command to make them more quality in the config? Or is this a DX issue? (Im on 91.)
set mat_picmip to -1 (improves perf for some reason).
set mat_picmip to -1 (improves perf for some reason).
im using comangliacoms and when i tab out i cant tab back in, anyone know how to fix that?
my game also crashes if i try and use dx 9
my game also crashes if i try and use dx 9
Ive put up a small very conservative version of comangliacoms since a lot of people would preffer that.
Its only 17 lines that are changed, very close to the original.
Download page
You can also just put this commands in your autoexec AFTER the "exec gfx" line https://pastebin.com/ukktSDvj
Moist_masterim using comangliacoms and when i tab out i cant tab back in, anyone know how to fix that?
my game also crashes if i try and use dx 9
what version of windows are you using? what are your specs?
Its only 17 lines that are changed, very close to the original.
[url=http://timfortress.today/pages/fps.html]Download page[/url]
You can also just put this commands in your autoexec AFTER the "exec gfx" line https://pastebin.com/ukktSDvj
[quote=Moist_master]im using comangliacoms and when i tab out i cant tab back in, anyone know how to fix that?
my game also crashes if i try and use dx 9[/quote]
what version of windows are you using? what are your specs?
Windows 10, i5-4210m, gt 750m
Im also using the toaster config with igpu addon
Im also using the toaster config with igpu addon
Hey, I'm having an issue using this where if I join a local server I can't move, and I can't shoot but the sound will come out (and be spammed if I chose to do so) like if I were in a paused match. This isn't a major issue because it only happens in local servers (such as tr_walkway) but I would like to use those to warm up and wondered if there is a fix. Thanks.
The server and alias cfgs are simply aliases that allow me to change cross hair quickly, I also use it to pull up net_graph while holding tab. Servers is aliases for the servers I frequent so there shouldn't be any harm in those.
[url=https://pastebin.com/RbzLyncd]autoexec[/url]
[url=https://pastebin.com/tchV0wnZ]gfx.cfg[/url]
[url=https://pastebin.com/6tQkschm]ly.cfg[/url]
The server and alias cfgs are simply aliases that allow me to change cross hair quickly, I also use it to pull up net_graph while holding tab. Servers is aliases for the servers I frequent so there shouldn't be any harm in those.
deguLylyhost_thread_mode 0
I'm a dumbo, thanks for the quick reply!
host_thread_mode 0[/quote]
I'm a dumbo, thanks for the quick reply!
nooooooo this config saved my pc and its done updating
So i would like to install the toaster config but there is something that annoys me .
There's a weird effect in the distance or on the floor when you walk forward that's not present in the stability config .
What command should i change to get right of it ?
There's a weird effect in the distance or on the floor when you walk forward that's not present in the stability config .
What command should i change to get right of it ?
[url=https://www.youtube.com/watch?v=KB-ajRmoO8Y&feature=youtube.com]The weird effect i'm talking about[/url]
I don't think it's that, i tried changing it but it didnt make any difference .
And also, the command mat_trilinear 1 is in the stability config too .
And also, the command mat_trilinear 1 is in the stability config too .
kuzanagiI don't think it's that, i tried changing it but it didnt make any difference .
And also, the command mat_trilinear 1 is in the stability config too .
then try mat_antialias 1
And also, the command mat_trilinear 1 is in the stability config too .[/quote]
then try mat_antialias 1