As I play in eu servers, i get 100-120ms ping and my hitscan registration is pretty inconsistent.
Below is the network setting i chose to use, by just "kinda experimenting with stuff" :
rate 100000
cl_interp 0
cl_interp_ratio 1
cl_cmdrate 67
cl_updaterate 67
My download rate is 2mbps and my upload is 0.7mbps. I normaly have no packet loss and 0-6 choke.
Is there anything i can change to improve my registration?
As I play in eu servers, i get 100-120ms ping and my hitscan registration is pretty inconsistent.
Below is the network setting i chose to use, by just "kinda experimenting with stuff" :
[quote]
rate 100000
cl_interp 0
cl_interp_ratio 1
cl_cmdrate 67
cl_updaterate 67
[/quote]
My download rate is 2mbps and my upload is 0.7mbps. I normaly have no packet loss and 0-6 choke.
Is there anything i can change to improve my registration?
ShemrAs I play in eu servers, i get 100-120ms ping and my hitscan registration is pretty inconsistent.
Below is the network setting i chose to use, by just "kinda experimenting with stuff" : rate 100000
cl_interp 0
cl_interp_ratio 1
cl_cmdrate 67
cl_updaterate 67
My download rate is 2mbps and my upload is 0.7mbps. I normaly have no packet loss and 0-6 choke.
Is there anything i can change to improve my registration?
Pretty sure it's impossible to get a rate that high, or at least useless
[quote=Shemr]As I play in eu servers, i get 100-120ms ping and my hitscan registration is pretty inconsistent.
Below is the network setting i chose to use, by just "kinda experimenting with stuff" :
[quote]
rate 100000
cl_interp 0
cl_interp_ratio 1
cl_cmdrate 67
cl_updaterate 67
[/quote]
My download rate is 2mbps and my upload is 0.7mbps. I normaly have no packet loss and 0-6 choke.
Is there anything i can change to improve my registration?[/quote]
Pretty sure it's impossible to get a rate that high, or at least useless
you could try this from comanglia's config, not sure if it would help or not but its a start.
cl_cmdrate 40
cl_interp 0
cl_interp_ratio 2
cl_lagcompensation 1
cl_pred_optimize 2
cl_smooth 0
cl_smoothtime 0.01
cl_updaterate 40
rate 35000
you could try this from comanglia's config, not sure if it would help or not but its a start.
cl_cmdrate 40
cl_interp 0
cl_interp_ratio 2
cl_lagcompensation 1
cl_pred_optimize 2
cl_smooth 0
cl_smoothtime 0.01
cl_updaterate 40
rate 35000
Try higher interp ratio first. The whole point of interp is being able to deal with loss and choke.
Try higher interp ratio first. The whole point of interp is being able to deal with loss and choke.