jp_
Account Details
SteamID64 76561198032914094
SteamID3 [U:1:72648366]
SteamID32 STEAM_0:0:36324183
Country United States
Signed Up September 7, 2012
Last Posted July 18, 2024 at 12:39 AM
Posts 691 (0.2 per day)
Game Settings
In-game Sensitivity .5 w/ mouse accel
Windows Sensitivity 6/11
Raw Input 1
DPI
1800
Resolution
1920x1080
Refresh Rate
120hz lightboost
Hardware Peripherals
Mouse repaired g400, thanks megawac
Keyboard filco ninja browns
Mousepad artisan hien
Headphones samson sr850
Monitor asus vg248qe
1 ⋅⋅ 17 18 19 20 21 22 23 ⋅⋅ 46
#2 program that estimates input lag in TF2 General Discussion

http://www.draebenstedt.de/reaction/reaction.html

posted about 11 years ago
#85 Interp Toggle Exploit in TF2 General Discussion
Eric SmithCan we get a confirmation if you guys are working on addressing the cl_interp exploit?

_pilger
Yes, we’re working on it.
-Eric
posted about 11 years ago
#7 TF2 changes to 640x480 in Q/A Help

-applaunch 10?
seriously?

-gl and -nocdaudio is only for gldsrc engine...

posted about 11 years ago
#13 good compressed air in Hardware
ZimmyTypically that happens when you don't shake it enough before use and/or do not hold it perpendicularly to the ground.

??? There's text on the can that says don't shake...

http://i.imgur.com/Q6L5Ccx.jpg

http://i.imgur.com/DcHBeBr.jpg

http://i.imgur.com/97vcn3b.jpg

posted about 11 years ago
#9 M y computer wont power on in TF2 General Discussion
Not_MatlockTo be honest, This problem could be caused by any failing piece of hardware. I've experienced this with dead processors, RAM, PSUs, and GPUs.

You can try taking the entire computer apart and attempt to switch out parts in attempt to find the broken piece, but in my experience it's easier just to take it to a shop and have them run a diagnostic on it.

I agree, the only way to diagnose the issue is to swap out parts. Unless you have a second PC and the time to do this, I'd follow matlock's advice.

I'm very surprised you haven't done anything after 3 BSOD's.

posted about 11 years ago
#15 Trying my hand at casting + update on video guides in TF2 General Discussion
MarxistAnother go around with a game I hadn't watched before - some render errors in the video but it's inherent in the FRAPs footage :( not too many errors that last too long.

https://www.youtube.com/watch?v=8nuHiPOOHL0

How's your computer? Instead of fraps how about recording with a different tool like dxtory or Afterburner (free) which has a choice of VFW codecs like x264/lagarith/UT Video. [UT video is Fucking fast lossless]

Some video stuff
-Disable frame blending because the panning scenes are jarring. If you're on vegas, make sure the project FPS matches the media fps and the export FPS matches the project fps.
http://i.imgur.com/JUbhXNk.jpg

-The bottom part of the introductions were difficult to read.

-Different hud with more readable spec thingy.

posted about 11 years ago
#2 asus gpu tweak recording in Off Topic

Msi afterburner

posted about 11 years ago
#4 Terrible audio quality after installing hitsound in Q/A Help

and it sounds fine without the dingaling?

Adjust the dingaling volume with...
tf_dingaling_volume

Lower it.

posted about 11 years ago
#7 Improving a scout in Q/A Help

120hz

posted about 11 years ago
#10 Lag spikes when somebody else is using the wi-fi in Hardware

Are you using 802.11n while the other devices are using 802.11g?
AFAIK, G and N on a 2.4ghz frequency can fuck each other over.

I would try falling back to wireless-g only. (General setup>Wireless>Basic Settings>Band)

edit: look at fix #3 http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed

posted about 11 years ago
#11 Help with OBS local recording in Hardware
crespiI'm wondering if overclocking my gpu would help with this at all, even though it's most likely my cpu that can't take the load. My gpu happens to be oc'able and at the same time run cooler.

No, there is no job on the GPU regarding the encoding process.

crespiMaybe i'll try the msi thing that jp recommended, but it seems like more of a pain.

After you get it setup, works great. The software doesn't allow binding a mouse button to the push-to-talk feature so I use a separate software.

A note...have you ever reduced the video resolution?
also you're on a laptop, isn't the disk speed 5400rpm? That's too slow.

posted about 11 years ago
#9 Problems with the Razer Deathadder 2013 in Hardware
AndI've tried cleaning the mouse already....
Re-installing the firmware
doesn't change anything ;_;

Give some more information, what pad, what polling rate, usb3.0/2.0. Have you adjusted calibration and LOD settings.

I think you'll get better answers at...
http://www.overclock.net/t/1128321/the-deathadder-megathread

posted about 11 years ago
#4 Anyone have experience with audio jack extensions? in Hardware

Keep it to the same wire gauge.

posted about 11 years ago
#6 Help with OBS local recording in Hardware

You're already using msi afterburner, why not use it?

You should also get a separate Hard disk to record onto.

posted about 11 years ago
#3 Anyone experienced with HUD modifications? in Q/A Help

have you tried replacing "scrim" with the actual command? connect ip;password ???;

posted about 11 years ago
1 ⋅⋅ 17 18 19 20 21 22 23 ⋅⋅ 46