Should mat_ trilinear bet set to 0 or 1?
KilgorsYou forgot to change the version numberv1.7a | 17 May 2015 |
heh
cirlowhen should i set r_occlusion to 0?
Don't I was wrong in the past, it boosts fps if you're in a very small map or don't ever leave a certain spot which unless you're playing dustbowl as an engineer or some bs it's better to have r_occlusion 1
ExaflamerShould mat_ trilinear bet set to 0 or 1?
my cfgs have it as 1, if you want to change it to 0 you can performance really shouldn't be affected unless you have the shittiest PC of all time.
[code]v1.7a | 17 May 2015 |[/code][/quote]
heh
[quote=cirlo]when should i set r_occlusion to 0?[/quote]
Don't I was wrong in the past, it boosts fps if you're in a very small map or don't ever leave a certain spot which unless you're playing dustbowl as an engineer or some bs it's better to have r_occlusion 1
[quote=Exaflamer]Should mat_ trilinear bet set to 0 or 1?[/quote]
my cfgs have it as 1, if you want to change it to 0 you can performance really shouldn't be affected unless you have the shittiest PC of all time.
Any info on what mat_disable_fancy_blending exactly does?
Also now you can disable the r_rimlight, but not sure if will give any performance boost.
Also now you can disable the r_rimlight, but not sure if will give any performance boost.
You can remove the command "cl_loadondemand_default" since it was removed from the game so it no longer does anything.
http://i.imgur.com/4nM6WOw.jpg Anyone know how to fix this?
edit : mat_mipmaptextures 0 is the fix for this.
edit : mat_mipmaptextures 0 is the fix for this.
Okay, last update broke the ability to run game with config.
EDIT: found the reason (at least on my computer), remove mat_antialias from your autoexec.cfg
EDIT2: another update fixed this issue.
EDIT: found the reason (at least on my computer), remove mat_antialias from your autoexec.cfg
EDIT2: another update fixed this issue.
so idk why i haven't seeked help with this yet but after the halloween update everyone was raving about their fps mine did improve on pub servers but it has been spiking on all servers ever since. any ideas?
Elepimpso idk why i haven't seeked help with this yet but after the halloween update everyone was raving about their fps mine did improve on pub servers but it has been spiking on all servers ever since. any ideas?
Like your game randomly froze for a couple of seconds, because of ping?
You're not alone.
Like your game randomly froze for a couple of seconds, because of ping?
You're not alone.
KentyElepimpso idk why i haven't seeked help with this yet but after the halloween update everyone was raving about their fps mine did improve on pub servers but it has been spiking on all servers ever since. any ideas?
Like your game randomly froze for a couple of seconds, because of ping?
You're not alone.
no like my fps just dips very low randomly
Like your game randomly froze for a couple of seconds, because of ping?
You're not alone.[/quote]
no like my fps just dips very low randomly
ElepimpKentyno like my fps just dips very low randomlyElepimpso idk why i haven't seeked help with this yet but after the halloween update everyone was raving about their fps mine did improve on pub servers but it has been spiking on all servers ever since. any ideas?
Like your game randomly froze for a couple of seconds, because of ping?
You're not alone.
That's basically what I meant...
You might want to try this: http://forums.steampowered.com/forums/showthread.php?t=1043281
It decreased the lags I had
Like your game randomly froze for a couple of seconds, because of ping?
You're not alone.[/quote]
no like my fps just dips very low randomly[/quote]
That's basically what I meant...
You might want to try this: [url=http://forums.steampowered.com/forums/showthread.php?t=1043281]http://forums.steampowered.com/forums/showthread.php?t=1043281[/url]
It decreased the lags I had
the thing is, it started after halloween only and i use windows 10.
What's the minimum interp you can get using this config?
What command disables dropback? (the outside of the map that you cant reach)
When i join a game, maps always feel empty without dropback. I want to enable it even if it lowers my fps a lot.
When i join a game, maps always feel empty without dropback. I want to enable it even if it lowers my fps a lot.
pellyxWhat command disables dropback? (the outside of the map that you cant reach)
When i join a game, maps always feel empty without dropback. I want to enable it even if it lowers my fps a lot.
I guess you are talking about the skybox?
r_3dsky 1 should enable it :)
When i join a game, maps always feel empty without dropback. I want to enable it even if it lowers my fps a lot.[/quote]
I guess you are talking about the skybox?
r_3dsky 1 should enable it :)
One question, this config has "SV_CHEATS" set to 1, can that get me banned?
HikikoStarOne question, this config has "SV_CHEATS" set to 1, can that get me banned?
no it's a server command
can be helpful when you make listen servers, also not all the commands in my config work outside of sv_cheats some are there if valve ever decides to let us use them, and sv_cheats cuts down on the number of errors that will be created for using commands the require it.
t4nkurWhat's the minimum interp you can get using this config?
the minimum interp possible in the game is 15.2 which my config should do just fine with good connection settings which are enabled by default
no it's a server command
can be helpful when you make listen servers, also not all the commands in my config work outside of sv_cheats some are there if valve ever decides to let us use them, and sv_cheats cuts down on the number of errors that will be created for using commands the require it.
[quote=t4nkur]What's the minimum interp you can get using this config?[/quote]
the minimum interp possible in the game is 15.2 which my config should do just fine with good connection settings which are enabled by default
zeSIMONpellyxWhat command disables dropback? (the outside of the map that you cant reach)
When i join a game, maps always feel empty without dropback. I want to enable it even if it lowers my fps a lot.
I guess you are talking about the skybox?
r_3dsky 1 should enable it :)
Thank you very much :)
1 more question. Command "cl_ejectbrass 0" should prevent bullets coming out of the minigun, but it doesnt work for me for some reason. Is it be cause of sv_pure 1 or something?
When i join a game, maps always feel empty without dropback. I want to enable it even if it lowers my fps a lot.[/quote]
I guess you are talking about the skybox?
r_3dsky 1 should enable it :)[/quote]
Thank you very much :)
1 more question. Command "cl_ejectbrass 0" should prevent bullets coming out of the minigun, but it doesnt work for me for some reason. Is it be cause of sv_pure 1 or something?
honshttp://imgur.com/4jhRTjU help?
same problem. on some maps its badder than others. On granary pro for example there are lots of props which are black including the crates at mid but on normal granary its fine.
edit: I don't know whether it was a tf2 update or updating my cfg that caused this, but its one reason why github and properly committing your changes would be useful comanglia ;)
same problem. on some maps its badder than others. On granary pro for example there are lots of props which are black including the crates at mid but on normal granary its fine.
edit: I don't know whether it was a tf2 update or updating my cfg that caused this, but its one reason why github and properly committing your changes would be useful comanglia ;)
Whats the difference between competitive and good connections?
NinjaDChonshttp://imgur.com/4jhRTjU help?
same problem. on some maps its badder than others. On granary pro for example there are lots of props which are black including the crates at mid but on normal granary its fine.
edit: I don't know whether it was a tf2 update or updating my cfg that caused this, but its one reason why github and properly committing your changes would be useful comanglia ;)
try changing mat_mipmaptextures it should work
same problem. on some maps its badder than others. On granary pro for example there are lots of props which are black including the crates at mid but on normal granary its fine.
edit: I don't know whether it was a tf2 update or updating my cfg that caused this, but its one reason why github and properly committing your changes would be useful comanglia ;)[/quote]
try changing mat_mipmaptextures it should work
marqueeehttp://images.akamai.steamusercontent.com/ugc/402306883444100493/2CDDECACB4786AC54DB9B070554AD867A9F9BA04/
what's this smoke that i only get if i use dx9. this is actually very distracting. using mid quality config btw
You're using the latest no explosion scripts from benroads if I'm not mistaken.
Those files utilize a weather particle which is disabled in dx8 but not in dx9 (causing funny hurricanes and fog)
what's this smoke that i only get if i use dx9. this is actually very distracting. using mid quality config btw[/quote]
You're using the latest no explosion scripts from benroads if I'm not mistaken.
Those files utilize a weather particle which is disabled in dx8 but not in dx9 (causing funny hurricanes and fog)
Any plans on making a dx9 version? Honestly curious how poor it actually performs, and assume Chris' isn't the best around anymore.
Well, yeah they're compatible but assume they're not as optimized as possible?
Well, yeah they're compatible but assume they're not as optimized as possible?
I cannot alt-tab after the latest update. Also the game doesn't run anymore with -dxlevel 81 in launch options.
question
why no r_worldlights 0 in config? makes dx9+ lighting look like dx8
dunno if it adds frames though
why no r_worldlights 0 in config? makes dx9+ lighting look like dx8
dunno if it adds frames though
I don't have quad core processor on my laptop but it has hyper threading dual core, is it fine to use "for Hi Quality PC" version config?
I'm using mid quality pc version currently.
I'm using mid quality pc version currently.
MeatballHLMI don't have quad core processor on my laptop but it has hyper threading dual core, is it fine to use "for Hi Quality PC" version config?
I'm using mid quality pc version currently.
Try using the high quality one, I believe it should work without crashing for you.
If you crash within 10-15 min of playing on any server go back to the mid-quality one.
I'm using mid quality pc version currently.[/quote]
Try using the high quality one, I believe it should work without crashing for you.
If you crash within 10-15 min of playing on any server go back to the mid-quality one.
ComangliaMeatballHLMI don't have quad core processor on my laptop but it has hyper threading dual core, is it fine to use "for Hi Quality PC" version config?
I'm using mid quality pc version currently.
Try using the high quality one, I believe it should work without crashing for you.
If you crash within 10-15 min of playing on any server go back to the mid-quality one.
Seems like it runs fine, no crashes. Thanks man. :)
I'm using mid quality pc version currently.[/quote]
Try using the high quality one, I believe it should work without crashing for you.
If you crash within 10-15 min of playing on any server go back to the mid-quality one.[/quote]
Seems like it runs fine, no crashes. Thanks man. :)